10-12-2014 11:04 AM - edited 03-19-2019 08:43 AM
Hi Guys,
Need your help for the below scenario.
Our customer has a CME where 4 FXO ports are already connected and working. Customer has added 2 more FXO port and few IP phones.
The requirement is when ever an outbound call is made from the newly configured IP phones, the call should go through the newly added FXO lines.
For eg ext 3001 , the outbound call should go through port 0/1/0
Already the prefix 9 is used for dialing the number and I guess only one prefix number can be used in CME.
I tried translation rule , cor list but none worked , the call is default going through the old fxo port and not to the new fxo port.
Can you guys help me with the configuration.
Regards
Sathya
10-13-2014 03:55 AM
Hi All,
Could you help me on this query.
Regards
Sathya
10-13-2014 05:36 PM
Previous post on similar issue might be helpful -
https://supportforums.cisco.com/discussion/11431746/h323-choose-outbound-fxo-port-based-calling-number
Thnx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide