×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

WLC terminal session flooding with Stats update: Non Zero value messages

Answered Question
Oct 14th, 2014
User Badges:

Hello,

On our WLC (5508 running on 7.4.100.0), as soon as I enable 'debug client', it floods up the terminal session with following messages:

*apfMsConnTask_4: Oct 14 09:06:46.627: Stats update: Non Zero value

*apfMsConnTask_4: Oct 14 09:06:46.627: Stats update: Non Zero value

*apfMsConnTask_4: Oct 14 09:06:46.627: Stats update: Non Zero value

 

It does display the client debugs but the above mentioned message floods the entire terminal session and I have to heave through these messages to read the actual client debug. Has anyone else encountered this? Is it a bug? 

 

P.S: The 'Stats update' message stops when I disable client debug.

 

Thanks,

Utkarsh

 

Correct Answer by singhmanaspratap about 2 years 10 months ago

Hi Utkarsh,

 

This is a bug in 7.4.100.0 code. Please open a TAC case to get the bug id. An upgrade would definitely fix the issue. You can upgrade the WLC to 7.4.121.0 as it is Assure Wave certified.

 

Thanks and regards,

Manas Pratap Singh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
singhmanaspratap Tue, 10/14/2014 - 08:17
User Badges:

Hi Utkarsh,

 

This is a bug in 7.4.100.0 code. Please open a TAC case to get the bug id. An upgrade would definitely fix the issue. You can upgrade the WLC to 7.4.121.0 as it is Assure Wave certified.

 

Thanks and regards,

Manas Pratap Singh

utkarsh.asthana Tue, 10/14/2014 - 10:50
User Badges:

Thanks, Manas! I will get in touch with TAC for the bug id.

 

Thanks,

Utkarsh

Actions

This Discussion