×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Connect AIR-LAP1142N-A-K9 to WLC-4402

Unanswered Question
Oct 22nd, 2014
User Badges:

I have inherited a wireless system. I need to add a few APs. I have no idea how to do this. I have plugged the AP into a port set to the correct VLAN. The AP is receiving an IP address from DHCP in the correct range. I have a laptop plugged into the console of one of the new APs and I have launched a session in Putty terminal emulator. What are the next steps I need to take? 

Details from an AP already in the WLC: https://docs.google.com/document/d/1Fsd_wiFmUmbuIgOJq_zb2yU-OnWund6Dmj7f1ceBoew/edit?usp=sharing 

Here is what Putty displays:

*Mar  1 17:42:31.061: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.55.8.54, mask 255.255.252.0, hostname APacf2.c50a.54cb

Translating "CISCO-CAPWAP-CONTROLLER.hardinnorthern.local"...domain server (10.55.1.1)

*Mar  1 17:42:38.434: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar  1 17:42:38.441: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.hardinnorthern.local
Not in Bound state.
*Mar  1 17:43:23.952: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar  1 17:43:27.528: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Andy Emerine Tue, 01/20/2015 - 05:27
User Badges:

What worked was adding 241 AP identifier scope option to DHCP for controller management. I don't think this is in that document. I believe there is a youtube vid out there that explains it well. 

Actions

This Discussion

Related Content