×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CUCM 10.5 integration withSiemens 3800 version 8

Unanswered Question
Oct 28th, 2014
User Badges:

Hello Team,

 

I am trying to integration of CUCM 10.5 with Siemens 3800 version 8 and need your help so that setup it if it is possible:

 

my applications and servers are:

 

Siemens 3800 version 8

CUCM 10.5

 

do i need any license/card to integrate each other or call flow?

do i need any speicifc configuration for call flow?

does Siemens 3800 version 8 support with CUCM 10.5?

how can use PBX Siemens 3800 version 8 PIR line for calling outside network from Cisco IP Phone?

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Amit Sharma Tue, 10/28/2014 - 06:59
User Badges:

Thanks

how can verify if my PBX support E1 qsig for  integration with cucm?

Aman Soi Tue, 10/28/2014 - 07:10
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Only EPABX vendor can confirm.

If it is latest model of EPABX, then, it would be supporting SIP as well but of course that compatibility should be there.

regds,

aman

Amit Sharma Tue, 10/28/2014 - 22:02
User Badges:

thanks for your information.

but as per compatibility guide, i am unable to see any integration document with CUCM 10.5 for Siemens 3800 version 8.

 

did any one found something related to this point?

 

Thanks

Actions

This Discussion