CUCM 10.5 integration withSiemens 3800 version 8

Amit23 · ‎10-28-2014

Hello Team,

I am trying to integration of CUCM 10.5 with Siemens 3800 version 8 and need your help so that setup it if it is possible:

my applications and servers are:

Siemens 3800 version 8

CUCM 10.5

do i need any license/card to integrate each other or call flow?

do i need any speicifc configuration for call flow?

does Siemens 3800 version 8 support with CUCM 10.5?

how can use PBX Siemens 3800 version 8 PIR line for calling outside network from Cisco IP Phone?

Warm Regard's
Amit Sahrma

Aman Soi · ‎10-28-2014

Hi Amit,

You can refer the link for compatibility

http://www.cisco.com/c/en/us/solutions/enterprise/interoperability-portal/networking_solutions_products_genericcontent0900aecd805b561d.html

You won't need any licenses if E1.QSIG is supported.

regds,

aman

Amit23 · ‎10-28-2014

Thanks

how can verify if my PBX support E1 qsig for integration with cucm?

Warm Regard's
Amit Sahrma

Aman Soi · ‎10-28-2014

Only EPABX vendor can confirm.

If it is latest model of EPABX, then, it would be supporting SIP as well but of course that compatibility should be there.

regds,

aman

Amit23 · ‎10-28-2014

thanks for your information.

but as per compatibility guide, i am unable to see any integration document with CUCM 10.5 for Siemens 3800 version 8.

did any one found something related to this point?

Thanks

Warm Regard's
Amit Sahrma