×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

peer firmware sharing

Answered Question
Oct 30th, 2014
User Badges:

I just want to ask about the peer firmware sharing feature on 78xx series. is it available and supported or not??

callmanager 9.1.2

firmware version 10.2.1

Correct Answer by Ayodeji Okanlawon about 2 years 9 months ago

This feature is enabled automatically on the phone once it is configured in cucm. You need to know how to use it. For this to be successfully deployed, all the phones must boot at the same time.

I don't have any documentation, I checked it on my CUCM9.1.2 server ad it is enabled by default

Correct Answer by Ayodeji Okanlawon about 2 years 9 months ago

Yes it is available and supported

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Ayodeji Okanlawon Thu, 10/30/2014 - 03:13
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Yes it is available and supported

bayasrah Thu, 10/30/2014 - 03:17
User Badges:

thanks for your reply,

 

do you have any documents includes this point  and explains how to enable this feature in the 78xx?

Correct Answer
Ayodeji Okanlawon Thu, 10/30/2014 - 05:02
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

This feature is enabled automatically on the phone once it is configured in cucm. You need to know how to use it. For this to be successfully deployed, all the phones must boot at the same time.

I don't have any documentation, I checked it on my CUCM9.1.2 server ad it is enabled by default

bayasrah Thu, 10/30/2014 - 05:11
User Badges:

thank you very much .. highly appreciate your help.

Actions

This Discussion