×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

3750x add stack member

Answered Question
Oct 30th, 2014
User Badges:
  • Bronze, 100 points or more

Hi,

I need to add another 3750x to an existing stack of 3 identical 3750x switches. My understanding is as long as the code matches and I connect the new stack member powered off and then power it on after all connections are made that should work without any problems on a production network. Please advise if there is more I can do to ensure a flawless procedure.

Thanks.

 

Correct Answer by Reza Sharifi about 2 years 9 months ago

Hi,

I would have an outage window just in case something goes wrong:

Also, Have a look at table-5-1 in this link:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/so...

 

Also see:

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-...

HTH

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion

Related Content