×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

IP Telephony CME Branch Connectivity

Unanswered Question
Nov 4th, 2014
User Badges:

Dear Team,

 

We have two sites , A in Egypt and B in Saudi

The site are connected through VPN

Site A already have CME ISR.

We will also install a CME ISR in Site B also.

will we able to configure the phones to make calls between the site A and B by just dialing the extn without using PSTN

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Manish Gogna Tue, 11/04/2014 - 01:52
User Badges:
  • Cisco Employee,

Hi Edwin,

This documentation is specific to CME.

Manish

Dennis Mink Tue, 11/04/2014 - 13:46
User Badges:
  • Blue, 1500 points or more

YES.  It pretty much boils down to creating dial-peers on both CME routers pointing to each other, with  patterns that constitute your internal number ranges.

edwincharles Tue, 11/11/2014 - 01:52
User Badges:

hi dennis,

Can you confirm if we use CME in riyadh and CME in Egypt (both sites having CME not SRST license), and both sites are connected together.

Will the user in riyadh will be able to dial an extn in egypt

Actions

This Discussion