×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

how to separate receptionist phone on C2951-CME-SRST/K9?

Answered Question
Nov 7th, 2014
User Badges:

Dear Expert,

 

i would like to ask some question about VOIP system.

Currently i'm using C2951-CME-SRST/K9 with Card VIC2-4FXO. my concern as below:

1- Should i add 2 more card ( VIC2-4FXO) on C2951 ? becuse i need 8 CoLine . is it support total VIC2-4FXO x 3 ? 

2- Currently i have one main phone ( Receptionist ) we can call Company "A"and i would like to create 2 more company on the same router , i mean that i create 2 more receptionist for Company "B"and "C", is it possible if i separate 3 main phone the same router?

 

Could you advice on this ? if you have sample configuration for separate receptionist please share for me ....

 

Best Regards,

Rechard 

Correct Answer by Sreekanth Narayanan about 2 years 9 months ago

Yes you can add 2 more cards to the router and have 12 fxo interfaces in total.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jaime Valencia Fri, 11/07/2014 - 07:33
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Yes, if you need 8 lines, you need 8 FXO ports, and so on

There's nothing special about this, just configure the ephone for each secretary and then the routing of which FXOs should go to whom.

rechard_hk Fri, 11/07/2014 - 16:57
User Badges:

Dear Jaime,

 

Thanks for your command.

could we add 2 more card ( VIC2-4FXO) on router 2951 ? currently i'm using 1 card ( VIC2-4FXO). so total 3 card for VIC2-4FXO.

Best Regards,

Rechard

rechard_hk Sun, 11/09/2014 - 18:26
User Badges:

Dear all Expert and Jaime,

 

could you confirm me on card Vic2-4FX0 support 3 card on 2951? 

Currently i'm using VIC2-4FXO one card, so could i add 2 more card on this router? if don't support , do we have other card that support 8 CO line ?

 

Best Regards,

Rechard

Correct Answer
Sreekanth Narayanan Mon, 11/10/2014 - 01:49
User Badges:
  • Cisco Employee,

Yes you can add 2 more cards to the router and have 12 fxo interfaces in total.

rechard_hk Mon, 11/10/2014 - 18:05
User Badges:

Dear Sreekanth,

 

Thank you for your advice.

i will order 2 more card.

 

Best Regards,

Rechard

Actions

This Discussion