11-10-2014 11:52 AM - edited 03-17-2019 12:52 AM
Whenever the user is using their headset and the headset button is lit green, when pressing the CONF or TRANSFER softkeys, the phone just places the call on hold and does not provide a dial-tone.
If pushing CONF or TRANSFER while on handset or speaker, it works normally.
11-10-2014 11:58 AM
You should mention what phone model (and FW) you're using, and what headset, if you expect any assistance.
11-10-2014 12:21 PM
Hi,
what kind of phones you have ?
I have a similar issue with 7941/7942/7970/7945. it was a bug with phone firmware.
you need only to upgrade to firmware 9.4(2).
HTH
Anas
Don't forget to rate the helpful posts
11-10-2014 12:31 PM
Hi,
take a look to the below thread
https://supportforums.cisco.com/discussion/12166856/problems-transferringanswering-calls-when-using-headset-79xx-phone-cscun26289
HTH
Anas
don't forget to rate the helpful posts
11-10-2014 12:31 PM
Sorry about that.
I am using 79XX with the 9-3-2 firmware.
Upgraded to new firmware and issue is now resolved.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: