How to: Customers in VLAN-A go to WAN1, customers in VLAN-B go to WAN2 ?

Khoa Pham · ‎12-12-2014

I have 2 internet feeds, I call them Internet-WAN1 and Internet-WAN2

I also have 2 VLANs, VLAN-A and VLAN-B

With 1 ASA5515, how do I set up so that clients in VLAN-A can access internet via WAN1 only ? And the same for VLAN-B to WAN2 ?

I'm familiar with the ASA5515. I just need some direction which feature should I look into? Or is it even possible ?

Vibhor Amrodia · ‎12-13-2014

Hi,

This will be something like policy based routing on the ASA device which is not supported.

This is not recommended but u can use the NAT statements to do this on the ASA device:-

object network obj-any

subnet 0 0

(VLAN-A,WAN1) source dynamic any interface destination static obj-any obj-any

(VLAN-B,WAN2) source dynamic any interface destination static obj-any obj-any

I think this should work.

Thanks and Regards,

Vibhor Amrodia