cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1198
Views
0
Helpful
6
Replies

2960SI won't accept any IOS? Hangs after POST is done

Vadym Belyayev
Level 1
Level 1

Hello guys,

 

I have an issue here with my 2960SI switch..

I decided to upgrade it with a newer IOS (previosuly it had some version of lanlite and worked fine)

I have tried the common 2960S IOS versions, but all of them were hanging after saying "image uncompressed and installed, executing..."

 

This time I tried to install a lanlite version of IOS, I already tried 2 of them, the 12.2(58) and 12.2(52)SE, both of them load, perform a POST, everything is successful and hang at the end, the last info that it shows is the following:

(The first image, 12.2(58) loaded at the very beginning, however, after I realoded the router to fix BAUD it never came back)


Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 24    WS-C2960-24-S      12.2(52)SE            C2960-LANLITEK9-M


%Warning! Hostname should contain at least one alphabet or '-' or '_' character
##X9†ÌÏÌ7°³viK2rµä6Â_H·g6C =0‹Íq«ü2°öp5y6˜þ

Here my console stops reacting..

 

What I am doing wrong?

 

 

 

1 Accepted Solution

Accepted Solutions

devils_advocate
Level 7
Level 7

I had a similar issue with a 3750x which hung after decompressing the image.

The fix for me was to delete all files from the flash (literally everything), boot into Rommon and Xmodem over a new IOS.

This then worked fine.

Mine was possibly a corruption in the flash but as it was a production switch, I didn't have the time to did deeper!

Thanks

View solution in original post

6 Replies 6

Leo Laohoo
Hall of Fame
Hall of Fame

Post the entire bootup process please.

Leo, this is the entire boot process

 

switch: boot
Loading "flash:c2960-lanlitek9-mz.122-52.SE.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@
File "flash:c2960-lanlitek9-mz.122-52.SE.bin" uncompressed and installed, entry
point: 0x3000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

 

Cisco IOS Software, C2960 Software (C2960-LANLITEK9-M), Version 12.2(52)SE, RELE
ASE SOFTWARE (fc3)
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 25-Sep-09 08:49 by sasyamal
Image text-base: 0x00003000, data-base: 0x01300000

Initializing flashfs...
Using driver version 1 for media type 1
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes     : 3870720
mifs[3]: Bytes used      : 1024
mifs[3]: Bytes available : 3869696
mifs[3]: mifs fsck took 0 seconds.
mifs[3]: Initialization complete.

mifs[4]: 4 files, 1 directories
mifs[4]: Total bytes     : 27998208
mifs[4]: Bytes used      : 7804416
mifs[4]: Bytes available : 20193792
mifs[4]: mifs fsck took 1 seconds.
mifs[4]: Initialization complete.

...done Initializing flashfs.

Checking for Bootloader upgrade.. not needed
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed

POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed

POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed

POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

Waiting for Port download...Complete


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960-24-S (PowerPC405) processor (revision J0) with 65536K bytes of me
mory.
Processor board ID FCQ1519Y48Z
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 58:35:D9:4B:96:80
Motherboard assembly number     : 73-12613-05
Power supply part number        : 341-0097-03
Motherboard serial number       : FCQ1518077F
Power supply serial number      : AZS151811A9
Model revision number           : J0
Motherboard revision number     : A0
Model number                    : WS-C2960-24-S
System serial number            : FCQ1519Y48Z
Top Assembly Part Number        : 800-32799-01
Top Assembly Revision Number    : G0
Version ID                      : V06
CLEI Code Number                : COMSJ00ARD
Hardware Board Revision Number  : 0x0A


Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 24    WS-C2960-24-S      12.2(52)SE            C2960-LANLITEK9-M


%Warning! Hostname should contain at least one alphabet or '-' or '_' character
nþ^+¾s X9†ÌÏÌ7°³viK2rµä6Â_¦;H·g6C =0‹Íq«ü2°öp5y6˜þ

devils_advocate
Level 7
Level 7

I had a similar issue with a 3750x which hung after decompressing the image.

The fix for me was to delete all files from the flash (literally everything), boot into Rommon and Xmodem over a new IOS.

This then worked fine.

Mine was possibly a corruption in the flash but as it was a production switch, I didn't have the time to did deeper!

Thanks

Thanks devils, I will try that!!

 

Devils,

 

I just formatted the flash card and did the fsck check, no errors..

Uploaded the same image and it worked!!!

Thanks a lot!! That was really a good experience for me!
 

Your welcome, my issue was slightly different but the symptoms were similar.

I just figured there was little to be lost by clearing the flash so it was worth a try!

Glad it worked

Review Cisco Networking products for a $25 gift card