cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1119
Views
0
Helpful
2
Replies

Remote management (Linksys spa2102)

eclipsemod555
Level 1
Level 1

Hello,
I have Linksys spa2102 (phone adapter with router), and the quastion is how to use remote control.
I know that in wan settings I have to enable "Remote Management" and port, I also choose static ip and wrote it in fields.
As I understand "Remote Management" function allows me to connect to linksys remotely from other place, from other internet.
So, now I know ip and port of linksys, but how to connect? Have I done all preparation for this?
Thank you

2 Replies 2

gohussai
Level 4
Level 4

You can check the following attached guide to do the configuration.

 

 

abwahid
Level 4
Level 4

Hi,

You need to enable the remote management in your case WAN Web Server of  linksys SPA2102 and then to mention the port, by default it is port 80, you may use another not is used port as well, after configuring this.

you need to put you WAN public IP in address bar along with port which you define.

https://WAN_Public_IP:8080

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: