Solved: CME with telephones analogic in port FXS

r-barbosa · ‎03-25-2015

Hi all,

I have a router with CME and 4 FXS ports, would like to set up call transfer that is possible with analog phones and FXS port and CME?

Regards

Aaron Harrison · ‎03-26-2015

It's possible, but fiddly - you'd need to have users dial codes etc.

e.g. http://www.cisco.com/c/en/us/td/docs/ios/voice/fxs/configuration/guide/15_1/fxs_15_1_cg_book/fxssccpsplmft.html

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Aaron Harrison · ‎03-26-2015

It's possible, but fiddly - you'd need to have users dial codes etc.

e.g. http://www.cisco.com/c/en/us/td/docs/ios/voice/fxs/configuration/guide/15_1/fxs_15_1_cg_book/fxssccpsplmft.html

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!