Hello Readers,
UC520 with Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(11)XW7, RELEASE SOFTWARE (fc2)
Problem is in redirecting calls.
We have telephone plan 271 001 2xx = 99 phone lines
Our telephone xxx xxx 224 is for hotline and we using him for redirecting INCOMING calls from our clients to mobile phones of our system engineers.
Everything is through SIP trunk to our provider (no GSM).
When I call to 224 from one of our end lines (in this case is 230) debug show me this:
The Call Setup Information is:
Call Control Block (CCB) : 0x8585965C
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 271001230
Called Number : 602203428
Source IP Address (Sig ): 178.x.x.x
Destn SIP Req Addr:Port : 212.x.x.x:5060
Destn SIP Resp Addr:Port : 212.x.x.x:5060
Destination Name : 212.x.x.x
When I call from mobile phone (simulating our client) debug show me this:
22:14:25: //259/B37214928320/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x84F7FF3C
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 2710010602278222
Called Number : 602203428
Source IP Address (Sig ): 178.x.x.x
Destn SIP Req Addr:Port : 212.x.x.x:5060
Destn SIP Resp Addr:Port : 212.x.x.x:5060
Destination Name : 212.x.x.x
There is 16 digits instead of 9.
Where, in configuration is problem?
TRANSLATION RULES:
voice translation-rule 1
rule 1 /^271001/ //
!
voice translation-rule 1110
rule 1 // /271001/
!
voice translation-rule 1111
rule 1 // /0/
!
voice translation-rule 1112
rule 1 /^271001/ //
!
voice translation-rule 1113
rule 1 /^0\(.*\)/ /\1/
!
!
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1110
translate called 1113
!
voice translation-profile INCOMING_TRANSLATION_PROFILE
translate calling 1111
translate called 1112
*********************************************************************************
TELEPHONY-SERVICE:
call-forward pattern .T
call-forward system redirecting-expanded
transfer-pattern 0.T
transfer-pattern .T
**********************************************************************************
Best Regards,
Steve