Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
3553
Views
0
Helpful
6
Replies

ATA 190 and CME 10.5

adolfocgx
Level 1
Level 1

‎05-15-2015 04:42 PM - edited ‎03-17-2019 03:01 AM

Hi guys can someone show me and example of the "fast track" configuration needed to setup an ATA190 in CME 10.5? or post a working example with this ATA 190 and CME?

 

 

 

Labels:
0 Helpful
6 Replies 6

Manish Gogna
Cisco Employee
Cisco Employee

‎05-15-2015 09:57 PM

Hi,

To deploy Cisco Unified SIP IP phones on Cisco Unified CME using the fast-track configuration approach, you require Cisco IOS Release 15.3(3)M or a later release.

To support Fast-Track Configuration feature, the voice register pool-type command has been introduced in the global configuration mode. The properties of the new SIP phone can be configured under the voice register pool-type submode. In addition to the explicit configuration of the phone’s properties, the reference-pooltype option can be used to inherit the properties of an existing SIP phone.

Check the section "SIP: Provisioning Using the Fast-Track Configuration Approach"

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmebasic.html#50575

HTH

Manish

 

0 Helpful

adolfocgx
Level 1
Level 1
In response to Manish Gogna

‎05-18-2015 03:54 PM

I´ve followed that instructions but the CME does not create the "ATADBFD18720801.cnf.xml" file,

 

this is my config

 

voice register pool-type  ATA190
 reference-pooltype ATA-187
!
voice register global
 mode  cme
 source-address 10.10.14.1 port 5060
 timeouts interdigit 5
 max-dn 200
 max-pool 30
 load 8831 sip8831.10-3-1-16.loads
 timezone 9
 mwi reg-e164
 voicemail 30648
 tftp-path flash:
 create profile sync 0002053712944464
 network-locale ES
 user-locale ES
 conference hardware

voice register pool  24
 busy-trigger-per-button 2
 id mac 34DB.FD18.7208
 type ATA190
 number 1 dn 24
 cor incoming call-Local default
 dtmf-relay rtp-nte sip-kpml sip-notify
 username 30624 password 30624
 no vad


**the tftp debug shows this: 

 

*May 18 21:27:42.943: TFTP: Looking for ATA34DBFD187208.cnf.xml
*May 18 21:27:42.943: TFTP: Sending error 1 No such file

 

and I runned a sh flash | inc .xml, all the oher phones files are there, but the ATA file is not, actually it shows as a SEP and not as a ATA.

 

SEP34DBFD187208.cnf.xml

 

any ideas?

0 Helpful

robbannon
Level 1
Level 1
In response to adolfocgx

‎05-26-2015 06:41 AM

I'd this problem on a Cisco 2921.It's a bug, fix is to upgrade to IOS c2900-universalk9-mz.SPA.155-2.T.bin. The bug is internal to Cisco so I don't have a bug id.

 

Once I upgraded I went into "voice register global" and "create profile". ATA Config file is now ATA34DBFD186700.cnf.xml, it was SEP34DBFD186700.cnf.xml previously.

 

voice register pool-type  ATA-190
 no phoneload-support
 reference-pooltype ATA-187
 
voice register dn  4
 number 2404
 allow watch
 name 2404
 label 2404
 
voice register pool  4
 id mac 34DB.FD18.6700
 type ATA-190
 number 1 dn 4
 username 2404 password 2404
 codec g711ulaw

0 Helpful

Charles Hill
VIP Alumni
VIP Alumni
In response to robbannon

‎05-27-2015 01:13 AM

Here is the bug id, however I don't have permissions to view it.

 

CSCus55079: ATA-190 does not create configuration file with prefix "ATA

0 Helpful

Nadeem Ahmed
Cisco Employee
Cisco Employee
In response to Charles Hill

‎05-29-2015 04:38 PM

Yes seems you are hitting this BUG. upgrade.

 

 

 

Br, Nadeem Please rate all useful post.
0 Helpful

gabopano23
Level 1
Level 1
In response to robbannon

‎05-29-2015 03:48 PM

I have a question, how many memory RAM has in your Router?, 512 MB or 1GB?

 

Regards...

0 Helpful
Customers Also Viewed These Support Documents