CSR1000V. DHCP server issue

KonstantinC · ‎05-28-2015

Hi!

There are two CSR1000V. One of them should recieve ip address through DHCP from another.

R1 is dhcp client, R2 is dhcp server

I see dhcp discovers on R2 and no mesages are sent:

R2# show ip dhcp server stat

Message Recieved

DHCPDISCOVER 32

DHCPREQUEST 0

...

Message Sent

BOOTREPLY 0

DHCPOFFER 0

KonstantinC · ‎05-28-2015

R2# debug ip dhcp server packet
DHCP server packet debugging is on.
Option 82 not present
DHCPD: Reload workspace interface GigabitEthernet3 tableid 1.
DHCPD: tableid for 10.0.0.1 on GigabitEthernet3 is 1
DHCPD: client's VPN is VPN1.
Option 82 not present
DHCPD: DHCPDISCOVER recieved from client 0100.0c29.d994.44 on interface GigabitEthernet3.
Option 82 not present

R2# debug ip dhcp events
DHCP server event debugging is on.
DHCPD: checking for expired leases.
DHCPD: Sending notification of DISCOVER:
DHCPD: htype 1 chaddr 000c.29d9.9444
DHCPD: remote id 020a00000300000100000000
DHCPD: table id 1 = vrf VRF1
DHCPD: interface = GigabitEthernet3
DHCPD: FSM state change INVALID
DHCPD: Workspace state changed from INIT to INVALID
DHCPD: classname not set in msg
DHCPD: there is no address pool for 10.0.0.1
DHCPD: Sending notification of ASSIGNMENT FAILURE
DHCPD: due to: NO POOL
DHCPD: htype 1 chaddr 000c.29d9.9444
DHCPD: remote id 020a00000300000100000000
DHCPD: table id 1 = vrf VRF1
DHCPD: interface = GigabitEthernet3
DHCPD: Sending notification of DISCOVER

Why DHCP does not work?

The same configuration on Catalyst 6509 and ASR1k connected to it works fine