CUCM with Fortigate

opnineopnine · ‎06-11-2015

Hello,

I have a cluster 1 (publisher) 3 (sucribers) the last sucriber is on a remote site, but I can't make the DB sync, I can reach the Publisher.

The thing is I have firewall on both sides and they are Fortigate, my question is, is there any special configuration I have to do on the Fortigate

to fix the DB issue?

Thanks.

Jaime Valencia · ‎06-11-2015

Did you review the TCP and UDP port usage guide for CUCM and made sure nothing is getting blocked???

HTH

java

if this helps, please rate

opnineopnine · ‎06-11-2015

yes sir,, all ports are open.

Carlo Poggiarelli · ‎06-11-2015

Hi.

Did configure a site to site vpn between those two firewalls?

Please refer to the following doc for tcp/udp communications on a CUCM cluster

HTH

Regards

Carlo

Please rate all helpful posts "The more you help the more you learn"

opnineopnine · ‎06-11-2015

Hello Carlo,

What doc?

Thanksl

Carlo Poggiarelli · ‎06-11-2015

Sorry

As usual I've forgotten the link:)

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/port/9_1_1/CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-91/CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-91_chapter_01.html

Sorry

Carlo

Please rate all helpful posts "The more you help the more you learn"

opnineopnine · ‎06-11-2015

Hello Carlo,

I already checked the ports and they are open as the document is requested.

Thanks.

Carlo Poggiarelli · ‎06-11-2015

Hi.

Have you checked the delay between Main and remote site ?

I remember you that it should be 40 ms one way.

Which is the output of a show network cluster

If possible post the result here

Let us know

Regards

Carlo

Please rate all helpful posts "The more you help the more you learn"