What card replaces the WS-720Sup-3B in the 6509 chassis?

hdebar4509 · ‎06-23-2015

My organization currently supports the 6509, we use the WS-720SUP-3B supervisor cards in them.

Since these cards are beyond support and can no longer be obtained we like to know what card has been set as the replacement.

Joseph W. Doherty · ‎06-23-2015

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

sup2t

hdebar4509 · ‎06-24-2015

Thank you, I'll check out the specs on that.

Jon Marshall · ‎06-24-2015

See this link for details -

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/catalyst-6500-series-supervisor-engine-2t/data_sheet_c78-648214.html

it is important to note that the sup2T does not support all the modules the sup720 does so you need to check that and the information is included in the link.

Jon