cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3618
Views
0
Helpful
1
Replies

Extract config files from Cisco Prime Infrastructure

CB90021204
Level 1
Level 1

Hi,

 

When devices are removed from Cisco Prime Infrastructure, all the configuration files are lost. I want to retain the configuration for reference on future network projects. 

 

I was wondering if I can access the files and back them up if possible.  On CWLMS 3.2 I could access the files at the link below. Is there a similar location within Cisco Prime?

 

"\\server name\c$\Program Files (x86)\CSCOpx\files\rme\dcma\shadow"

 

Thanks,

1 Accepted Solution

Accepted Solutions

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi ,

 

check these post for your answer

https://supportforums.cisco.com/discussion/12036841/prime-infrastructure-20-device-configurations

 

https://supportforums.cisco.com/discussion/11852236/pi-where-devices-archive-files-are-located#3975460

 

 

 

Thanks-

Afroz

***Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

View solution in original post

1 Reply 1

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi ,

 

check these post for your answer

https://supportforums.cisco.com/discussion/12036841/prime-infrastructure-20-device-configurations

 

https://supportforums.cisco.com/discussion/11852236/pi-where-devices-archive-files-are-located#3975460

 

 

 

Thanks-

Afroz

***Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: