Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
295
Views
0
Helpful
1
Replies

CME Calling Party shows unknown number on Phones

suaybaguio
Level 1
Level 1

‎06-26-2015 03:01 PM - edited ‎03-19-2019 09:45 AM

        Bearer Capability i = 0x8090A2 
                Standard = CCITT 
                Transfer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98387 
                Exclusive, Channel 7 
        Progress Ind i = 0x8183 - Origination address is non-ISDN  
        Calling Party Number i = 0x21A0, '2258' 
                Plan:ISDN, Type:National 
        Called Party Number i = 0xA1, '1005' 
                Plan:ISDN, Type:National

****

Need help in figuring our why Calling Party doesn't show on my cisco phone, but it shows in my debug. On my phone it says 'From Unknown Number' but on debug it clearly have the calling party provided by the other end.

 

Thanks!


Arbin

Labels:
0 Helpful
1 Reply 1

Manish Gogna
Cisco Employee
Cisco Employee

‎06-26-2015 10:11 PM

Hi Arbin,

There are some good pointers in the following post specially checking the config under ISDN serial interface and isdn switch-type config which you can check

https://supportforums.cisco.com/discussion/9787236/cme-pri-caller-id-name-issue-facility-ie

 

HTH

Manish

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents