cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
854
Views
0
Helpful
1
Replies

C3750 stack switches ciscoEnvMonSupplyState wrong return

loiccruchade
Level 1
Level 1

Hello everyone !

I'm posting on this forum because i'm having an issue with a stack of 3750X.

All power supply are OK when i check them, but when i do an snmpwalk, it return like one of the power supply is faulty :

 

ETA1-NR16001#sh env power all
 SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts
---  ------------------  ----------  ---------------  -------  -------  -----
1A  C3KX-PWR-350WAC     DTN1603L0H5 OK              Good     Good     350/0
1B  C3KX-PWR-350WAC     LIT16020TC2 OK              Good     Good     350/0
2A  C3KX-PWR-350WAC     LIT16210ANR OK              Good     Good     350/0
2B  C3KX-PWR-350WAC     LIT16020TJW OK              Good     Good     350/0

 

 

the snmpwalk :

OID=.1.3.6.1.4.1.9.9.13.1.4.1.2.1023, Type=OctetString, Value=Switch#1, Fan#1
OID=.1.3.6.1.4.1.9.9.13.1.4.1.2.1025, Type=OctetString, Value=Switch#1, Fan#2
OID=.1.3.6.1.4.1.9.9.13.1.4.1.2.2036, Type=OctetString, Value=Switch#2, Fan#1
OID=.1.3.6.1.4.1.9.9.13.1.4.1.2.2042, Type=OctetString, Value=Switch#2, Fan#2
OID=.1.3.6.1.4.1.9.9.13.1.4.1.3.1023, Type=Integer, Value=1
OID=.1.3.6.1.4.1.9.9.13.1.4.1.3.1025, Type=Integer, Value=1
OID=.1.3.6.1.4.1.9.9.13.1.4.1.3.2036, Type=Integer, Value=1
OID=.1.3.6.1.4.1.9.9.13.1.4.1.3.2042, Type=Integer, Value=1
OID=.1.3.6.1.4.1.9.9.13.1.5.1.2.1022, Type=OctetString, Value=Sw1, PS1 Normal, RPS NotExist
OID=.1.3.6.1.4.1.9.9.13.1.5.1.2.1024, Type=OctetString, Value=Sw1, PS2 Normal, RPS NotExist
OID=.1.3.6.1.4.1.9.9.13.1.5.1.2.2034, Type=OctetString, Value=Sw2, PS1 Normal, RPS NotExist
OID=.1.3.6.1.4.1.9.9.13.1.5.1.2.2035, Type=OctetString, Value=Sw2, PS2 Faulty, RPS NotExist

 

I'm actually running an IOS wich is OK if i look at this bug report :

https://tools.cisco.com/bugsearch/bug/CSCtx16194/?reffering_site=dumpcr

 

sh ver :

Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(58)SE2, RELEASE SOFTWARE (fc1)

 

I dont know how to fix it.

 

Thanks for your help !

 

 

 

1 Reply 1

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi ,

 

you have  done your homework very well.. thanks for that ,however the code you are running is still impacted by the BUG::

 

CSCtx16194 is fixed in the following 43 versions

 

12.2(55.6.93)SE8
15.0(2.0.43)EB
15.0(2.1)EJ
15.0(2.1.5)SE3
15.0(2.70.1)SE3
15.1(1.7.1)EC
15.2(1)EX0.116
15.2(1)EX0.54
15.2(1.0.96)IPI2
15.2(1.1.13)EY
15.2(1.1.21)E
15.2(1.1.5)EY
15.2(2.0)MCP29
15.2(2.0.0)L53
15.2(2.0.0)QSD
15.2(2.0.10)QSD
15.2(2.0.15)PI-PD
15.2(2.0.41)PI3
15.2(2.0.44)EA
15.2(2.0.66)PI_PD
15.2(2.0.72)PI3
15.2(2.0.9)MW
15.2(2.1.1)E
15.2(2.1.13)PI3
15.2(2.1.26)CD
15.2(2.1.40)CD
15.2(2.1.5)E
15.2(2.1.7)CD
15.2(2.10.1)SDN
15.2(2.10.30)SDN
15.2(2.10.38)SFW
15.2(2.10.66)SDN
15.2(2.2.0)E
15.2(2.50.89)SDN
15.2(3.0.16)PID
15.2(3.0.18)CC4
15.2(3.0.27)PI4
15.2(3.0.30)MG
15.2(3.0.5)MG
15.2(3.0.7)WC
15.2(4.0.1)DL
15.2(4.0.42)PI5

 

Thanks-

Afroz

***Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****