Hi guys,

I had an e-mail from our Web team admin with a graph stating that there is an issue with the load balancing configuration.

We've got two front end servers SDHSPWFE01, and SDHSPWFE02. 
According to the graph below, they can see http and https traffic hitting SDHSPWFE01 which is the green line. However, SDHSPWFE02 is the black line which is constantly on zero.

I've had a look at the Datacentre context and ran the following commands:

ACE-CR1-LOADBALANCER/Datacentre# sh stats loadbalance 

+------------------------------------------+
+------- Loadbalance statistics -----------+
+------------------------------------------+
 Total version mismatch                       : 0
 Total Layer4 decisions                       : 2540
 Total Layer4 rejections                      : 0
 Total Layer7 decisions                       : 40621
 Total Layer7 rejections                      : 0
 Total Layer4 LB policy misses                : 0
 Total Layer7 LB policy misses                : 0
 Total times rserver was unavailable          : 0
 Total ACL denied                             : 0
 Total IDMap Lookup Failures                  : 0
 Total Misc Errors                            : 0
 Total Cipher Lookup Failures                 : 0
 Total Msg sent to Optimization               : 0
 Total Direct Msg received from Optimization  : 0
 Total Indirect Msg received from Optimization: 0
 Total Optimization Msg sent to Real Servers  : 0

I've ran many show commands and have a great deal of output, but was wondering if there is a specific one I can use to pin point if this is an ACE/Configuration issue or a server issue?

We are using Leastcount Predictor and sticky when configuring hosts.