Switch Port Problem

prakalaathan · ‎07-03-2015

Hi All,

I'm getting following error.

783247: Jul 3 15:28:12.388 PDT: %ILPOWER-7-DETECT: Interface Gi2/15: Power Device detected: IEEE PD
783248: Jul 3 15:30:14.905 PDT: %ILPOWER-7-DETECT: Interface Gi2/15: Power Device detected: IEEE PD
783249: Jul 3 15:31:43.626 PDT: %ILPOWER-7-DETECT: Interface Gi2/15: Power Device detected: IEEE PD
783250: Jul 3 15:31:44.026 PDT: %C6K_POWER-SP-1-PD_HW_FAULTY: The device connected to port 2/15 has a hardware problem. Power is turned off on the port

Please help me to find out this errors..

Thanks.,

Prakalathan

Luciane de Medeiros Batista · ‎07-03-2015

Hi Prakalathan,

I suggest you check the device connected to port Power over Ethernet (PoE) Gi2/15 of its Catalyst 6K. It is likely that the device requires a greater supply of power to the port may offer. Check the device's specifications and your port.

Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/troubleshooting/g_power_over_ethernet.html#wp1018018

(Session: Surge-In Current.)

Regards,
Luciane de Medeiros