errors in the discover the server UCS B440 M2

CSCO11814843 · ‎07-22-2015

I have the following errors in the discover the server UCS B440 M2 in the chasis UCS 5180 the firmware is 2.1(1f)

FSM

FSM Status: In Progress

Description:

Current FSM Name: Discover

Completed at:

Progress Status: 9%

Remote Invocation Result: End Point Protocol Error

Remote Invocation Error Code:1002

Remote Invocation Description: Unable to change blade power state-MC Error (-20): Management controller cannot or failed in progressing request

Thanks for you help

Keny Perez · ‎07-22-2015

Likely to be a power-on issue "Unable to change blade power state"... open a TAC case to confirm and replace if needed.

-Kenny

jchavesd · ‎07-23-2015

Try to decommission and re-acknowledge the Blade. If the issue re-occurs a TAC case will need to be opened to replace Mobo

Jaiveer · ‎08-29-2022

Remote Invocation Error Code:1002

This type error always come when we configure the server and we do not found any solution.

Alfredo Juarez · ‎09-06-2023

ANY SOLUTION???

RedNectar · ‎09-06-2023

Hi @Alfredo Juarez

This thread is 8 years old. If you have a similar problem, it may be worth while starting a new thread. If your problem is related tot he original error mentioned "Remote Invocation Error Code:1002" then open a TAC case.

RedNectar aka Chris Welsh.
Forum Tips: 1. Paste images inline - don't attach. 2. Always mark helpful and correct answers, it helps others find what they need.