Hello All,

We have this new vlan created in one of our switches.However when checking the stp state for this vlan , it shows:-
"Spanning tree instance(s) for vlan does not exist"

To note, this vlan is created only on this one switch as of now. There is a single port and few trunk ports that host this new vlan.
On the trunk ports, i can see this vlan is listed under "Vlans Err-disabled on Trunk"
I have shutdown the port for the moment.

vlan101
name KPL_GEM

int eth1/5
description KPL_GEM-host1
  shutdown
  switchport access vlan 101
  spanning-tree port type edge
  spanning-tree guard root

sh vlan outputs shows this vlan as being existing in the switch
sh vlan id 101

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
101  KPL_GEM       active    Po21, Po11, Eth1/5

Appreciate all inputs as to what could be wrong and how to fix this.