Hi,
I'm trying to configure this switch for a new campus network, with 7 different vlans. They want 1 vlan to be shared, for printers, scanners, Apple TVs, etc, and 3 other vlans to have access to that one. And all to get out to Internet.
So...
vlan1 = students
vlan2 = teachers
vlan3 = admin
vlan4 = shared devices
Trunk interface is configured with all vlans tagged, trunk is tied to trust Ethernet on a firewall
What I've tried is:
switchport mode general
switchport general vlan 1 tagged, vlan 4 untagged
pvid = vlan1
With that configuration I can't get out to Internet, and also can't ping vlan4 IP from vlan1 device
So I tried changing both to untagged, same result. Only if I change the port back to access mode, with a single vlan can I get to Internet - but I can't access shared devices that way.
How do I do this?