Solved: ASA - Anyconnect is not enabled afer reload.

marionikic · ‎10-06-2015

Hi,

everytime my ASA is reloaded anyconnect is not enabled.

It has to be manualy enabled.

I have asa 5510 with version 8.4.2.

Florin Barhala · ‎10-06-2015

So you're saying that after you reload you have a different configuration then before?

Can you make a file compare of the configs before and after the reboot and see what line is missing if the case?

Florin Barhala · ‎10-06-2015

So you're saying that after you reload you have a different configuration then before?

Can you make a file compare of the configs before and after the reboot and see what line is missing if the case?

marionikic · ‎10-06-2015

Only thing I need to do is to check mark on "Enable CIsco Anyconnect VPN CLien access on the interfaces.."

It is always dissabled after reload.I susspect it's a bug.

Florin Barhala · ‎10-06-2015

It might be a bug, still I am curious about that configuration files diff.

CLI line should look like: anyconnect enable

marionikic · ‎10-06-2015

CLI looks like this:

ciscoasa5510# show running-config | beg anyconnect
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-3.1.05160-k9.pkg 1
anyconnect enable

System image file is "disk0:/asa842-k8.bin

I can not perfor restart.ASA is in production.