cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
243
Views
0
Helpful
3
Replies

Incoming call can't match incoming dial-peer

bo liu
Level 4
Level 4

i config the dial-peer like this

 

dial-peer voice 1007 pots
 translation-profile incoming CallBack
 call-block translation-profile incoming call_block
 call-block disconnect-cause incoming call-reject
 incoming called-number 843791...
 fax rate disable
 direct-inward-dial
 !
dial-peer voice 1008 pots
 translation-profile incoming CallBack
 call-block translation-profile incoming call_block
 call-block disconnect-cause incoming call-reject
 incoming called-number 843792...
 fax rate disable
 direct-inward-dial


dial-peer voice 1006 pots
 translation-profile incoming E1-incoming
 call-block translation-profile incoming call_block
 call-block disconnect-cause incoming call-reject
 service csyw
 incoming called-number 8437....
 fax rate disable
 direct-inward-dial
!

 

but when i dial a number 84379110,the call should match 1007 but it match 1006,why ????

 

 

.Oct 21 10:16:51.808: //-1/A039182898E2/CCAPI/cc_api_display_ie_subfields:
   cc_api_call_setup_ind_common:
   cisco-username=
   ----- ccCallInfo IE subfields -----
   cisco-ani=13311173269
   cisco-anitype=2
   cisco-aniplan=1
   cisco-anipi=0
   cisco-anisi=3
   dest=84379110
   cisco-desttype=4
   cisco-destplan=1
   cisco-rdie=FFFFFFFF
   cisco-rdn=
   cisco-rdntype=-1
   cisco-rdnplan=-1
   cisco-rdnpi=-1
   cisco-rdnsi=-1
   cisco-redirectreason=-1   fwd_final_type =0
   final_redirectNumber =
   hunt_group_timeout =0
.Oct 21 10:16:51.808: //-1/A039182898E2/CCAPI/cc_api_call_setup_ind_common:
   Interface=0x14FE6664, Call Info(
   Calling Number=13311173269,(Calling Name=)(TON=National, NPI=ISDN, Screening=Network, Presentation=Allowed),
   Called Number=84379110(TON=Subscriber, NPI=ISDN),
   Calling Translated=FALSE, Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE,
   Incoming Dial-peer=1006, Progress Indication=NULL(0), Calling IE Present=TRUE,
   Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=-1
.Oct 21 10:16:51.808: //-1/A039182898E2/CCAPI/ccCheckClipClir:
   In: Calling Number=13311173269(TON=National, NPI=ISDN, Screening=Network, Presentation=Allowed)
.Oct 21 10:16:51.808: //-1/A039182898E2/CCAPI/ccCheckClipClir:
   Out: Calling Number=13311173269(TON=National, NPI=ISDN, Screening=Network, Presentation=Allowed)
.Oct 21 10:16:51.808: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
   
.Oct 21 10:16:51.808: :cc_get_feature_vsa malloc success
.Oct 21 10:16:51.808: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
   
.Oct 21 10:16:51.808:  cc_get_feature_vsa count is 226
.Oct 21 10:16:51.808: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
   
.Oct 21 10:16:51.808: :FEATURE_VSA attributes are: feature_name:0,feature_time:369343064,feature_id:936110
.Oct 21 10:16:51.808: //1460499/A039182898E2/CCAPI/cc_api_call_setup_ind_common:
   Set Up Event Sent;
   Call Info(Calling Number=13311173269(TON=National, NPI=ISDN, Screening=Network, Presentation=Allowed),
   Called Number=84379110(TON=Subscriber, NPI=ISDN))
.Oct 21 10:16:51.808: //1460499/A039182898E2/CCAPI/cc_process_call_setup_ind:
   Event=0x245DBE0
.Oct 21 10:16:51.808: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
   Try with the demoted called number 84379110
.Oct 21 10:16:51.812: //1460499/A039182898E2/CCAPI/ccCallSetContext:
   Context=0x133506C4
.Oct 21 10:16:51.812: //1460499/A039182898E2/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 1460499 with tag 1006 to app "_ManagedAppProcess_CSYW"
.Oct 21 10:16:52.008: //1460496/9FBDCD5298E1/CCAPI/ccCallSetupAck:

 

3 Replies 3

Hi.

This because dialpeer is more specific for dialed number 

On DP 1007 you have

incoming called-number 843791... ( 3 dots)

 

while on DP 1006 you have

incoming called-number 84379...

which is the best option for dialed number

 

Try to eliminate a dot from DP 1007 and it should be the best option

 

Let me know 

HTH

Regards

Carlo

Please rate all helpful posts "The more you help the more you learn"

a ....sorry ....i mistake

 

the right is 843791..  2dot...

Nadeem Ahmed
Cisco Employee
Cisco Employee

First of all, you having overlapping dial-peer which can cause this issue this is not at all recommended to configured in such way .either Set the preference or set inter-digit time out . also you apply the configuration as suggested carlo too.

 

 

br,
Nadeem

Br, Nadeem Please rate all useful post.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: