11-13-2015 10:54 AM - edited 03-05-2019 02:44 AM
Hello everyone,
I have a 2821 router with 2 x VWIC2-1MFT-T1/E1 cards connecting ppp links in a bundle, we are replacing it with a 2951 but also adding a new ppp link, nevertheless we would like to reuse the existing VWIC2 cards and just procuring a new VWIC3-1MFT-T1/E1 card for adding this additional link in the same bundle, my question here: would it be possible to have a multilink working with vwic2 and vwic3 cards?
Thanks for your help.
Solved! Go to Solution.
11-15-2015 08:41 PM
Hello,
I just checked one of my routers. I have ppp multilink on two different modules. wic-1dsu-t1-v2 and VWIC2-1MFT-T1/E1. So it should work in your case too.
multilink work properly.
Hope it helps,
Masoud
11-13-2015 08:18 PM
Hello,
I think you would have no problem because E1/T1 cards provides layer one connectivity while ppp multilink is L2.
Masoud
11-15-2015 08:41 PM
Hello,
I just checked one of my routers. I have ppp multilink on two different modules. wic-1dsu-t1-v2 and VWIC2-1MFT-T1/E1. So it should work in your case too.
multilink work properly.
Hope it helps,
Masoud
11-16-2015 09:38 AM
Thanks so much Masoud!
11-16-2015 09:40 AM
You are most welcome.
Masoud
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: