cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
14056
Views
0
Helpful
1
Replies

Cisco ASA syslog default UDP port 514 change

shalendra2
Level 1
Level 1

Hi Team,

                We want to change the syslog forwarding port 514 to 516 in Cisco ASA firewall. Can we change that? If it is then, How?

Because if we are changing it. It gives error "The port Number for UDP must be either 514 or between 1025 to 65535".

Please help us.

Regards,

Shalendra

1 Accepted Solution

Accepted Solutions

bhavsha2
Cisco Employee
Cisco Employee

Hello Shalendra,

By default the ASA uses UDP 514 port for sending the sysylog information . So port no 516 cannot be configured. The port range has to be in the range of 1025-65535

ciscoasa(config)# logging host tftp 1.1.1.1 udp/516
WARNING: interface Ethernet0/1 security level is 0.
ERROR: Port '516' is not within the range 1025-65535.

Regards,

Bhavik Shah

View solution in original post

1 Reply 1

bhavsha2
Cisco Employee
Cisco Employee

Hello Shalendra,

By default the ASA uses UDP 514 port for sending the sysylog information . So port no 516 cannot be configured. The port range has to be in the range of 1025-65535

ciscoasa(config)# logging host tftp 1.1.1.1 udp/516
WARNING: interface Ethernet0/1 security level is 0.
ERROR: Port '516' is not within the range 1025-65535.

Regards,

Bhavik Shah

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: