×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

QoS over IPsec on Small Business Router - RV220W

Unanswered Question
Dec 22nd, 2015
User Badges:

Hello, 

I am trying to configure QoS over IPsec connecetion between two RV220W routers.

-WAN QoS Profiles are not working, having configured every possible way, using both priority settings and rate limit (1mbps) 

-Using Profile Binding, traffic selector using IP addresses are not working (tried using the source, destination, for the LAN and WAN IP addresses) 

-Speed tests are not showing any change no matter how differently I change the options.


I have read this article (http://www.cisco.com/c/en/us/td/docs/security/asa/asa92/configuration/fi...) and found out that 

For IPsec-encrypted packets, you can only match traffic based on the DSCP or precedence setting.

–   IPsec-over-TCP is not supported for priority traffic classification.


I am unfamiliar with DSCP and would appreciate some suggestions as how to configure QoS over IPsec between two RV220W Routers. 


If you need any other info let me know. 


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jtymchuk1 Wed, 12/23/2015 - 08:34
User Badges:

Doing more research into this I have discovered that I need to configure a DVTI to apply QoS. 

Am I on the right track? 

Actions

This Discussion