cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
386
Views
0
Helpful
2
Replies

CISCO SPA112 and TR-069

ermakov_pavel
Level 1
Level 1

Hello!

Cisco SPA112 stops data transmission TR069, if the connection request from the server, it responds RST.

After applying the settings, or restart, a SPA112 while working normally, then again stops sending data to the server .

2 Replies 2

Dan Lukes
VIP Alumni
VIP Alumni

According your description, it seems you are able to capture TR069 session between device and server. Can you capture the packets into file and attach them here for analysis ? The capture data should cover all TR069 data from "while working normally" to "again stop sending".

Also, turn on debug&syslog of Voice application, catch them and attach as well.

The attached file tcpdump three attempts to transfer data to the server . The first and second attempts - OK. After the third attempt data SPA112 sends RST, after stops sending data to the server . Debug turned on , wait for the repeat of the problem.