cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1298
Views
0
Helpful
3
Replies

Nexus NOS upgrade

anzaankd_07
Level 1
Level 1

Hello.. I have an issue in downloading a NOS file from TFTP server to my Nexus 5010. I can transfer from Nexus switch to TFTP server but reverse is failing. 

the error i am getting:-

TFTP get operation failed:File not found.

Its also says that connection to server established and  after that I get this error.

TFTP get operation failed:File not found.

The similar process for router and switch is working. Bur for nexus , its failing

I am using management Port for the file transfer.

Any help would be greatly appreciated.

3 Replies 3

anzaankd_07
Level 1
Level 1

Also, i can see similar issues in past support form, but not able to find the right answer for it there in any comments.

I am using TFTP32 software only for file transfer.

 

switch# ping 192.168.1.1 vrf management -------> MY LAPTOP IP Add
PING 192.168.1.1 (192.168.1.1): 56 data bytes
Request 0 timed out
64 bytes from 192.168.1.1: icmp_seq=1 ttl=127 time=4.829 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=127 time=3.865 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=127 time=4.069 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=127 time=4.071 ms

--- 192.168.1.1 ping statistics ---
5 packets transmitted, 4 packets received, 20.00% packet loss
round-trip min/avg/max = 3.865/4.208/4.829 ms
switch#
switch#
switch# ping 192.168.1.2 vrf management --------> MY NEXUS MGMT 0 IP ADD
PING 192.168.1.2 (192.168.1.2): 56 data bytes
64 bytes from 192.168.1.2: icmp_seq=0 ttl=255 time=0.942 ms
64 bytes from 192.168.1.2: icmp_seq=1 ttl=255 time=0.385 ms
64 bytes from 192.168.1.2: icmp_seq=2 ttl=255 time=0.343 ms
64 bytes from 192.168.1.2: icmp_seq=3 ttl=255 time=0.338 ms
64 bytes from 192.168.1.2: icmp_seq=4 ttl=255 time=0.385 ms

--- 192.168.1.2 ping statistics ---
5 packets transmitted, 5 packets received, 0.00% packet loss
round-trip min/avg/max = 0.338/0.478/0.942 ms

Error 

Message:-

switch# copy tftp: bootflash:
Enter source filename: n5000-uk9-kickstart.4.2.1.N2.1a.bin
Enter vrf (If no input, current vrf 'default' is considered): management
Enter hostname for the tftp server: 192.168.1.1
Trying to connect to tftp server......
Connection to Server Established.
                                                                                TFTP get operation failed:File not found
switch#

if i use this tftp server to upload IOS image to router / switches,it works fine.

 

please check on attahced file as well.

InayathUlla Sharieff
Cisco Employee
Cisco Employee

Could you use tftp32 and make sure the file is in root directory.

Let me know in case if that fails.

Regards

Inayath

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: