SNMP interface info is missing ...

leandro roggerone · ‎02-01-2016

Hi guys , Im having a strange issue here:

I want to add an interface to be graphed on my cacti monitor but it is not listed on interfaces options for the device.

After debugging snmp commands I noticed that there is not any info available for this interface.

This interface, has a name, an alias ,it is operative up and serving 400 mbps.

Al other interfaces are ok and their info is available on snmp queries.

Any Ideas ?

Regards.

Leo.

Mine is a:

cisco ASR9K Series (Intel 686 F6M14S4) processor with 6291456K bytes of memory.

Intel 686 F6M14S4 processor at 2127MHz, Revision 2.174

ASR 9010 AC Chassis with PEM Version 2

Running:

Cisco IOS XR Software, Version 5.2.2[Default]

The interface config is:

Interface 06/1/1

Mon Feb 1 12:19:05.781 GMT

interface TenGigE0/6/1/1

description ##CORE##

cdp

mtu 9216

ipv4 address 10.0.0.1 255.255.255.240

flow ipv4 monitor NETFLOW-FMM-IPV4 sampler NETFLOW-SAMPLER ingress

flow ipv4 monitor NETFLOW-FMM-IPV4 sampler NETFLOW-SAMPLER egress

!

RP/0/RSP0/CPU0:TIBA-IGW01#sh int te 0/6/1/1

Mon Feb 1 12:19:20.142 GMT

TenGigE0/6/1/1 is up, line protocol is up

Interface state transitions: 7

Hardware is TenGigE, address is d46d.505b.5fb1 (bia d46d.505b.5fb1)

Layer 1 Transport Mode is LAN

Description: ##CORE## ENLACE METROTEL EWS 1

Internet address is 10.0.0.1/28

MTU 9216 bytes, BW 10000000 Kbit (Max: 10000000 Kbit)

reliability 255/255, txload 1/255, rxload 0/255

Encapsulation ARPA,

Full-duplex, 10000Mb/s, link type is force-up

output flow control is off, input flow control is off

loopback not set,

ARP type ARPA, ARP timeout 04:00:00

Last input 00:00:00, output 00:00:00

Last clearing of "show interface" counters 1w4d

5 minute input rate 37183000 bits/sec, 6640 packets/sec

5 minute output rate 66859000 bits/sec, 7864 packets/sec

2250779096 packets input, 1357587491397 bytes, 3 total input drops

1589 drops for unrecognized upper-level protocol

Received 338 broadcast packets, 800581 multicast packets

0 runts, 0 giants, 0 throttles, 0 parity

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

3218102241 packets output, 3742884399922 bytes, 0 total output drops

Output 0 broadcast packets, 326706 multicast packets

0 output errors, 0 underruns, 0 applique, 0 resets

0 output buffer failures, 0 output buffers swapped out

0 carrier transitions

Philip D'Ath · ‎02-02-2016

I see the gold star release for your platform is 5.3.3. I would be tempted to move to that.

https://software.cisco.com/download/release.html?mdfid=282414851&catid=268437899&softwareid=280805694&release=5.3.3&relind=AVAILABLE&rellifecycle=MD&reltype=latest