cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
185
Views
0
Helpful
1
Replies

Fabric utilization OID for the C6800 high-density multi-rate line cards

Iulian Vaideanu
Level 4
Level 4

I'm looking for the OID that would give me all fabric utilization percentages (show platform hardware capacity fabric) for the C6800-*P10G cards.  For older cards (like X6704 and X6708) I'm using cc6kxbarStatisticsInUtil (1.3.6.1.4.1.9.9.217.1.3.1.1.6) and cc6kxbarStatisticsOutUtil (1.3.6.1.4.1.9.9.217.1.3.1.1.7), but those only show the first two of the four fabric channels of C6800-32P10G.

Thank you.

1 Reply 1

Iulian Vaideanu
Level 4
Level 4

Still looking for those OIDs (running IOS 15.2(1)SY2, if that matters)...

Also, I think the "Fabric connection" section here is wrong:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6800/hardware/installation/guide/b_c6800_modules/b_c6800_modules_chapter_01.html#concept_1CAF116561484CCEBDB1434271D98687

I believe fabric channel 0 includes ports 2,4,...,16, channel 1 = ports 18,20,...,32, channel 2 = ports 1,3,...,15 and channel 3 = ports 17,19,...,31.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: