nexus 7010 sup2e upgrade to 7.2.0 problem

fly · ‎05-19-2016

attach ment is console log when nexus 7010 sup2e reboot

we upgrade nexus 7010 sup2e from 6.2.12 to 7.2.0.D1.1

we leave only one sup2e in slot 5 and use traditional upgrade method not issu

but after upload new nx-os,modify boot variable ,and reboot

found system autoboot to old version software.

we check boot var, it did modify to now software version

attachment is log file

is this flash RAID issue of bootflash

thank you

InayathUlla Sharieff · ‎06-02-2016

Can you try this:-

To perform a non-ISSU upgrade to Release 7.2(x) from any supported Cisco NX-OS release prior to Release 7.2(0), follow these steps:

1. Change the boot variable.

Example:

boot kickstart bootflash:/n7000-s2-kickstart.7.2.0.D1.1.bin sup-1
boot system bootflash:/n7000-s2-dk9.7.2.0.D1.1.bin sup-1

2. Enter the copy running-config startup-config vdc-all command.

3. Enter the reload command to reload the switch.

HTH