I am able to ping from router 1 to router 2 connected by GE0/0 ports on both sides. I am also able to ping to the vlan interface ip address set up for all ports on the network module. I can ping from router 2 to the host just fine.
I know I'm missing something to route from the GE0/0 port on router 2 to the vlan, but not sure what it is. So far for routing I have:
ROUTER 1
router rip
version 2
network 192.168.1.0 (this is the GE0/0 network)
neighbor 192.168.1.2 (this is router 2 GE interface)
ROUTER 2
router rip
version 2
network 192.168.10.0 (this is host vlan network)
network 192.168.1.0 (this is the GE0/0 network)
neighbor 192.168.1.1 (this is router 1 GE interface)
interface vlan 10
ip address 192.168.10.1 255.255.255.0 (I can ping this from router 1)
Thanks for any help you might be able to provide.