Solved: ASA 5515 WITH FIREPOWER

amalmichaelvj · ‎07-21-2016

Hello team,

I have one cisco ASA5515 WITH FIREPOWER .Problem is that upon powering on the Alarm indication is showing red colour.And i am not able to access the console and management interface of asa,.What might be problem.??Kindly help

Marvin Rhoads · ‎07-21-2016

The hardware installation guide outlines the various reasons why you might have a lit Alarm LED. Please refer here:

http://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5500xguide/5500xhw/asa_overview.html#87733

You need to get console or management access to verify the actual cause.

View solution in original post

Marvin Rhoads · ‎07-21-2016

The hardware installation guide outlines the various reasons why you might have a lit Alarm LED. Please refer here:

http://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5500xguide/5500xhw/asa_overview.html#87733

You need to get console or management access to verify the actual cause.

amalmichaelvj · ‎07-21-2016

Hello Marvin,

Thanks for Support....

The power voltage might not be a problem,bcs many other device including Cisco wlc 2504,Catalyst series 3850,2960 switch are working fine on same server room.And room is air conditioned.

So this can be hardware failure.Any more views regarding this issue from your experience?