Solved: Export of Current Firmware on Devices

magnum629 · ‎08-15-2016

I did not see an option under exporting phone details, and I am looking for a report that lists all the devices with the firmware that is currently loaded on each of them. Running CUCM 9.1.2. Thanks!

Deepak Rawat · ‎08-15-2016

You can run show risdb query phone on all the CM servers in the cluster to which phones are registered and then sort out the output in MS Excel and find the active FW load

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118307-probsol-cucm-00.html

Regards

Deepak

View solution in original post

Mohammed Khan · ‎08-15-2016

"show tech devdefaults" command will provide phone firmware defined in CUCM.

"show risdb query phone" command will provide phone firmware loaded on the phone.

HTH

Regards,

Mohammed Noor

Aman Soi · ‎08-19-2016

[+5] to Khan for sharing the command "show tech devdefaults" regds, aman

Aman Soi · ‎08-15-2016

hi ,

check this discussion

https://supportforums.cisco.com/discussion/12012036/how-know-firmware-version-all-devices-cucm-cluster

regds,

aman

Deepak Rawat · ‎08-15-2016

You can run show risdb query phone on all the CM servers in the cluster to which phones are registered and then sort out the output in MS Excel and find the active FW load

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118307-probsol-cucm-00.html

Regards

Deepak

magnum629 · ‎08-15-2016

Thank you everyone!