cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
385
Views
0
Helpful
5
Replies

asa 5515 firepower and HA active/standby

amalmichaelvj
Level 1
Level 1

team,

I have a new cisco asa firepower 5515X.

I am not able to do configurations in firepower.

How to check asa firepower is installed or not?

ciscoasa# show module sfr

Mod Card Type Model Serial No.
---- -------------------------------------------- ------------------ -----------
sfr FirePOWER Services Software Module ASA5515 FCH2004797U

Mod MAC Address Range Hw Version Fw Version Sw Version
---- --------------------------------- ------------ ------------ ---------------
sfr 00c8.8bd3.979f to 00c8.8bd3.979f N/A N/A 5.3.1-152

Mod SSM Application Name Status SSM Application Version
---- ------------------------------ ---------------- --------------------------
sfr ASA FirePOWER Up 5.3.1-152

Mod Status Data Plane Status Compatibility
---- ------------------ --------------------- -------------
sfr Up Up

CAN ANY ONE HELP??

2 Accepted Solutions

Accepted Solutions

Jetsy Mathew
Cisco Employee
Cisco Employee

Hello Team,

Looks like the sfr is up .

Have you completed the installation using the following link ?

http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html

If so, how you going to manage the firepower module ? Is it via ASDM or a Firesight Management Center ?

What kind of configurations that you are referring to ?

Regards

Jetsy 

View solution in original post

Hello Team,

Do you have a Firesight Mangement Center with connectivity with this ASA firepower. If so use that device as an ssh server and copy the file. But FTP should work as we tried this several times in our own lab. Make sure that teh connectivity is fine with the FTP and device that youa re trying to upgrade.

Rate and correct if the post helps you

Regards

Jetsy 

View solution in original post

5 Replies 5

Jetsy Mathew
Cisco Employee
Cisco Employee

Hello Team,

Looks like the sfr is up .

Have you completed the installation using the following link ?

http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html

If so, how you going to manage the firepower module ? Is it via ASDM or a Firesight Management Center ?

What kind of configurations that you are referring to ?

Regards

Jetsy 

Jesty,

thanks for update.

Let me complete and update you

hello team,

i am  not able to upload pkg file from ftp server.

76 packets transmitted, 0 packets received, 100% packet loss
asasfr-boot>
asasfr-boot>system install ftp://172.16.0.22/asasfr-sys-5.3.1-155.pkg
Verifying

111
Upgrade aborted.

Can any one help??

Hello Team,

Do you have a Firesight Mangement Center with connectivity with this ASA firepower. If so use that device as an ssh server and copy the file. But FTP should work as we tried this several times in our own lab. Make sure that teh connectivity is fine with the FTP and device that youa re trying to upgrade.

Rate and correct if the post helps you

Regards

Jetsy 

Dear Jetsy,

Thanks for update...

Uploaded pkg file to asa.

Redirect Traffic to the SFR Module is not done

How can i check firepower is installed properly..??

I dont have firesight management.Can firepower configured and managed on box.Asdm still missing firepower configuration tab..

Kindly reply if possible...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: