08-28-2016 06:04 AM
Hi,
i need to get the isl's information (both sides = pwwn and peer pwwn).
Up until lately, i used the command "show interface" and then i could get my pwwn and the peer pwwn from the trunking information.
I noticed that when the trunking prt is down (from a failure or some other reason, i don't get the necessary information from the commad).
can someone help how to get the WWN info of all the isl's in my network, regardless the port state?
I thought to use "show topology -isl" but it doesn't print me the WWN's that i needs.
Thank!
05-06-2017 07:25 AM
were you able to get this information?
05-07-2017 04:13 AM
see eg.
http://www.cisco.com/en/US/products/ps5989/prod_troubleshooting_guide_chapter09186a008067a2da.html#wp51727
The following commands may be useful in troubleshooting PortChannel and trunking:
•show port-channel compatibility-parameters
•show port-channel summary
•show port-channel database
•show port-channel consistency detail
•show port-channel usage
•show interface
•show interface trunk
•show trunk protocol
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide