11-16-2016 07:13 AM - edited 07-05-2021 06:07 AM
hi,
I have a 5760 with 3.6.4, when i upload the wlc config on the wlc analyzer i got the msg:
Controller wlc_name information is incomplete. Sh tech and sh tech wireless are required
This is a bug?.
i have uploaded also the sh tech and sh tech wireless on different files or in the same.. but the msg still appears after the upload.. this is normal..
Do i need to upload only one file for config, sh tech and sh tech wireless...?.
regards,
Juan Pablo
Solved! Go to Solution.
11-16-2016 07:22 AM
Hola Juan Pablo
for IOS-XE, you should load in a single file the output for sh tech and sh tech wireless
if that is not working, please send me the file zipped, and I will test it here
For 16.x, it is just sh tech wireless
regards
11-16-2016 07:22 AM
Hola Juan Pablo
for IOS-XE, you should load in a single file the output for sh tech and sh tech wireless
if that is not working, please send me the file zipped, and I will test it here
For 16.x, it is just sh tech wireless
regards
11-16-2016 07:33 AM
Hi Javier,
I got it, first i upload the wlc config and then only the sh tech wireless.
thanks for your help
regards,
Juan Pablo
03-19-2017 04:42 PM
Hi there
I have the same problem trying to analyze the config from a 5760 running on 03.06.03E. I am using WLCCA version 4.3(7) and I have tried uploading every possible combination of the 'show running-config', 'show tech' and 'show tech-wireless' files.
Thanks for any help on this.
Regards,
Christian
03-19-2017 04:53 PM
All of a sudden it works...
Thats how I did it just in case someone else is having the same issue sometime.
- create a txt file
- first add the output of WLC#show tech on top
- then add the output of WLC#show tech wireless beneath
- save the txt file
- open the file with WLCCA
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: