cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1960
Views
5
Helpful
2
Replies

Block inter-user traffic?

m1xed0s
Spotlight
Spotlight

Hi, 

I remember there is a configuration on WLC for blocking the inter-user traffic (even users are on the same VLAN/SSID) but failed to find the feature in documentations. Anyone know the official name of the feature OR the configuration path to enable it?

1 Accepted Solution

Accepted Solutions

There is a feature called "P2P blocking" which will prevent communication between users on the same WLAN.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_01010001.html

There are some restrictions of this feature which is listed in above URL

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

2 Replies 2

There is a feature called "P2P blocking" which will prevent communication between users on the same WLAN.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_01010001.html

There are some restrictions of this feature which is listed in above URL

HTH

Rasika

*** Pls rate all useful responses ***

Perfect!! Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: