×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco SPA301-G3 IP phone

Unanswered Question
Jan 16th, 2017
User Badges:

Hi

I'm trying to find/or do I need the sgn file to get the above phone onto our system.  We are using CUCM v9.1.2

I've got the firmware files, but I cannot find out if thats all that is required, any help would be greatly appreciated.


Thanks in advance


Regards

Nick.




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Mon, 01/16/2017 - 06:13
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

There are no files required as SPA devices are all considered SIP 3rd party endpoints as far as CUCM in concerned, so, you won't find any files for them to use with CUCM.

nallin123 Mon, 01/16/2017 - 06:24
User Badges:

Hi Jamie

Thanks for the info, I've tried to configure the phone as a 3rd party SIP device, but it still is not recognised.

I went into the gui of the phone, and all I get is the SPA301 device info screen, I dont get an admin login like the websites suggest. I've reset the phone many times, but nothing seems to allow me to configure it to work with CUCM v9.1.3.

Regards

Nick.

Actions

This Discussion