01-19-2017 04:20 PM - edited 03-05-2019 07:52 AM
Hi all, hope everyone is well !!
I have two devices that I need to redirect traffic to and I am wondering if it's possible to have more than one WCCP instances enable under the same interface. Please see example below, where wccp 53/54 are associated to one ACL and wccp 61/62 are associated to another ACL
int g0/0
ip wccp 53 redirect in
ip wccp 54 redirect in
ip wccp 61 redirect in
ip wccp 62 redirect in
Thanks everyone in advance !!!
Danny
Solved! Go to Solution.
01-25-2017 12:28 AM
I believe so.
One WCCP device should advertise it can process services a,b and the other WCCP device should advertise it can process services c and d.
The router will redirect the request to the device that says it can provide the service being redirected.
http://www.cisco.com/c/en/us/td/docs/ios/12_2/configfun/configuration/guide/ffun_c/fcf018.html
01-25-2017 12:28 AM
I believe so.
One WCCP device should advertise it can process services a,b and the other WCCP device should advertise it can process services c and d.
The router will redirect the request to the device that says it can provide the service being redirected.
http://www.cisco.com/c/en/us/td/docs/ios/12_2/configfun/configuration/guide/ffun_c/fcf018.html
01-25-2017 03:57 PM
Hi Philip,
Thanks Philip !! I appreciate the info !!
Danny
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: