Cisco ISE 1.4 - Switch port status is notconnected

aslam.bajwa · ‎02-13-2017

Hello All ,

we have implemented Cisco ISE 1.4 and working fine , but i am facing the issue with some clients that when Apply ISE on Switch port , its going to NOtconnected Status and after that its remain in the same state for long time though i do shut/no shut , removing the ISE from the Switch ports but port status is remain same for long time .

Please Assist .

nspasov · ‎02-14-2017

Hi there. I have a few questions:

1. What is the switch model and version of code

2. Have you checked and confirmed that you don't have a bad cable :)

3. Can you post the AAA, port and RADIUS configs

Thank you for rating helpful posts!

Farhan Mohamed · ‎03-07-2017

Use the following attribute to fix it:

AVPair attribute termination-action-modifier=1

Let me know if it works