the anyconnect package on the secure gateway could not be located.

marquerj · ‎02-14-2017

Hi,

Need help anyone.

Encountered this error using installed anyconnect-predeploy-linux-64-3.1.13015-k9.tar.gz on Redhat 6.8 server 64bit.

Attached error screenshot.

Thanks in advance.

Rahul Govindan · ‎02-14-2017

You have to upload and reference the Anyconnect for Linux .pkg file on the ASA. For example, you ASA should show you this:

webvpn
 enable outside
 anyconnect image disk0:/<anyconnect-for linux-filename>.pkg

Do a "show run webvpn" on your ASA to check the above.

marquerj · ‎02-14-2017

Thanks Rahul for quick revert!

We'll ask our network team to perform the steps provided.

marquerj · ‎02-23-2017

Hi Rahul,

May we know the update on this please.

Thank you!

marquerj · ‎02-19-2017

Hi Rahul,

Here is the result.

# sh run webvpn
webvpn
enable IBS
anyconnect image disk0:/anyconnect-win-3.1.05160-k9.pkg 1
anyconnect image disk0:/anyconnect-linux-3.1.05160-k9.pkg 2

Rahul Govindan · ‎02-24-2017

Are you connecting from a 64 bit linux machine? The package file "anyconnect-linux-3.1.05160-k9" is only for 32 bit Linux. There should be another linux package for 64 bit that you have to upload. 3.1 and earlier versions supported 32 bit Linux so there were 2 packages. Now 4.x releases only support 64 bit so there is only one package.

marquerj · ‎02-24-2017

Yes, I'm connecting from RHEL 64bit server.

Rahul Govindan · ‎02-24-2017

You need to upload to the 64 bit package on the ASA:

anyconnect image disk0:/anyconnect-linux-64-3.1.05160-k9.pkg 3

Or you can upload some of the newer Anyconnect 4.x linux package on the ASA.