Hello Folks,
When i try to configure the Class-map type traffic it complains as highlighted below. This is on NCS 6008 running XR 5.2.5 software.
This class-map type traffic was introduced in 5.2.4. Anyone knows how to get this working.
-----------------------------
class-map type traffic match-all cls1
match precedence 1
end-class-map
!
!!% Policy manager does not support this feature: class-map type support details unavailable type : traffic
end
RP/0/RP0/CPU0:ios(config-cmap)#show configuration failed inheritance
Wed Feb 15 17:00:20.839 UTC
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.
!
class-map type traffic match-all cls1
match precedence 1
end-class-map
!
!!% Policy manager does not support this feature: class-map type support details unavailable type : traffic
end
-----------------------------
Have all the packages active as shown below.
RP/0/RP0/CPU0:ios#show install active
Node 0/RP0/CPU0 [RP]
Boot Partition: xr_lv20
Active Packages: 7
ncs6k-xr-5.2.5 version=5.2.5 [Boot image]
ncs6k-mpls-5.2.5
ncs6k-k9sec-5.2.5
ncs6k-mcast-5.2.5
ncs6k-mgbl-5.2.5
ncs6k-doc-5.2.5
ncs6k-li-5.2.5
Node 0/4/CPU0 [LC]
Boot Partition: xr_lv0
Active Packages: 7
ncs6k-xr-5.2.5 version=5.2.5 [Boot image]
ncs6k-mpls-5.2.5
ncs6k-k9sec-5.2.5
ncs6k-mcast-5.2.5
ncs6k-mgbl-5.2.5
ncs6k-doc-5.2.5
ncs6k-li-5.2.5
RP/0/RP0/CPU0:ios#show ver
Cisco IOS XR Software, Version 5.2.5
Copyright (c) 2013-2014 by Cisco Systems, Inc.
Build Information:
Built By : ahoang
Built On : Thu Mar 17 19:26:37 PDT 2016
Build Host : iox-lnx-006
Workspace : /auto/srcarchive16/production/5.2.5/all/workspace
Version : 5.2.5
Location : /opt/cisco/XR/packages/
cisco NCS-6000 () processor
Thanks