Hi,

I am having a little trouble redistributing a per user static route (PPPOE) into an instance of RIP running inside a VRF.

I am receiving routes from the neighboring router however the PPPOE static route is not being placed in the neighboring routers routing table.

Please see config below:

Current configuration : 606 bytes
ip vrf Greatham
rd 65001:9
route-target export 65001:9
route-target import 65001:9
!
!
interface GigabitEthernet0/3
no ip address
ip flow ingress
duplex auto
speed auto
media-type rj45
negotiation auto
!
!
interface GigabitEthernet0/3.108
encapsulation dot1Q 108
ip vrf forwarding Greatham
ip address 10.82.255.253 255.255.255.252
ip flow ingress
!
router rip
!
address-family ipv4 vrf Greatham
redistribute static
network 10.0.0.0
no auto-summary
exit-address-family
!
ip route vrf Greatham 0.0.0.0 0.0.0.0 10.82.255.254
ip route vrf Greatham 10.82.0.0 255.255.0.0 10.82.255.250
end

----------

Routing Table 

Gateway of last resort is 10.82.255.254 to network 0.0.0.0

S* 0.0.0.0/0 [1/0] via 10.82.255.254
10.0.0.0/8 is variably subnetted, 4 subnets, 3 masks
U 10.82.0.0/16 [1/0] via 10.82.255.250
C 10.82.255.250/32 is directly connected, Virtual-Access5
C 10.82.255.252/30 is directly connected, GigabitEthernet0/3.108
L 10.82.255.253/32 is directly connected, GigabitEthernet0/3.108
R 192.168.109.0/24
[120/1] via 10.82.255.254, 00:00:18, GigabitEthernet0/3.108

Any ideas would be greatly appreciated.

Thanks

Chris